Victorian Sweatshop Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
Mrs. D

Avatar / Picture

Senior Member
Registered:
Posts: 833
Reply with quote  #1 
Donna Kohler's Singer 13, notched bobbin right, same as my Singer 12, .jpg  I have two Singer 12s, 1884 and 1886.  Both require notched bobbin (shown at the right).  Will you help me find 2 pcs. to 6 pcs.  Singer 12,c1886, ser 7,132,396.jpg Here's the bobbin winder showing pin and slot for a notched bobbin.

Thank you.




__________________
Mrs. D - Wisconsin
http://www.1893victorianfarmhouse.blogspot.com
0
JonesHand52

Senior Member
Registered:
Posts: 348
Reply with quote  #2 
For those of a mechanical inclination, the modern replacement long bobbins have pressed on ends. What I would do is get some of those, pull off one end, then put the shaft in a drill and take a file to spin it down to the diameter of the earlier notched bobbin. Then I would do the same the the other end, pushing the brass end back on each end in turn (I have re-spaced long bobbins this way as well). When done, you can use a Dremel cutoff disc to cut a groove in the bobbin end disc or use a needle file or hacksaw blade. 

If you can make one, you can make a hundred. I make my own White tubular bobbins and these notched type bobbins would be an easy project. 

-Bruce
0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.